Idahome Grown Roofing
Metal Roofing in Meridian for Homes, Shops and Outbuildings
We install standing seam roofs in 24- or 26-gauge steel with concealed fasteners and custom flashings, and we repair metal panel roofs, on houses, shops and commercial buildings in Meridian.
We answer the phone or call back the same working day.
Price a Metal Roof
One call books a free, no-obligation estimate for a new standing seam roof or a metal panel repair.
(208) 858-8078 Call for a Free Estimate- Licensed and insured
- Whole job quoted up front
Steel, seamed and flashed
Metal Roofing in Meridian for Homes and Businesses
Metal roofing in Meridian means standing seam and metal panel roofs, and we install and repair both on homes, shops and commercial buildings.
A standing seam roof is a run of steel panels joined at raised seams, with the fasteners hidden under the seam instead of driven through the face of the panel. The panels are 24- or 26-gauge steel, and the flashings are bent to fit the roof they go on rather than pulled off a shelf.
- Free, no-obligation estimates, measured on your roof, not guessed from the street.
- We quote the whole job before we start, with no surprise charges after.
- We answer the phone or call back the same working day.
What goes on the roof
Metal Roofing Systems: Standing Seam and Panels
We install standing seam roofs with concealed fasteners and custom flashings, and we repair the metal panel roofs already up on homes and shops.
These are the metal roof parts and finishes we put on a Meridian roof:
-
Standing seam panels
Steel panels that lock together at raised seams and sit on floating clips, so every fastener stays hidden under the seam.
-
24- or 26-gauge steel
24-gauge is the heavier panel and can carry a Kynar 500 finish. Commercial metal roofs typically call for at least 26-gauge steel.
-
Custom flashing
Trim bent to fit each eave, rake, valley, wall and pipe on your roof, so the edges shed water as well as the panels do.
-
Metal panel repairs
Repairs to metal panel roofs on houses, shops and outbuildings, from a leaking flashing to a damaged run of panels.
What it costs
How Metal Roofing Is Priced
A metal roof costs more up front than asphalt shingles, and its price is set by the roof's area, the panel type, the gauge and the trim.
Where your roof lands depends on its size and the system on it, and the measure on the day settles it. These four things move a quote:
- Area, measured in squares of 100 square feet of roof surface.
- Panel type and gauge, standing seam or metal panel, 24 or 26.
- Trim and flashing at every edge, valley and penetration.
- The tear-off, where extra layers and deck repairs raise the price.
Metal roofing in Meridian
$6,700 to $41,800
Typical range across roof sizes and system types
Basic standing seam, 1,500 sq ft
$10,000 to $15,700
Where a plain mid-size seamed roof usually lands
Your exact price comes from walking your roof, and we put it in writing before we start.
From the call to the ridge cap
How a Metal Roof Is Installed, Deck to Ridge
We tear off to the deck, lay underlayment, set the panels on clips with custom flashings at every edge and penetration, and cap the ridge.
A metal roof goes on in these six steps:
Free estimate
We walk the roof, measure it and quote the whole job in writing before any work starts.
Tear-off to the deck
The old roofing and underlayment come off, and we inspect the decking and repair what needs it.
Underlayment
A synthetic underlayment goes over the whole deck as the waterproof layer under the steel.
Panels on clips
Each panel is held to the deck by clips under its seam, so no fastener goes through the face.
Custom flashing
We fit flashing at every edge and penetration and treat it with the panels as one wind and water system.
Ridge cap and cleanup
The ridge is capped last, and we clean up when the work is done.
What a Neighbor Said
Michael did a great job for us. Met him randomly because he bought something from me on FB Marketplace, and then we got talking. Soon enough we were walking around on my roof and he gave me a very competitive quote. He was super professional and the roof is done right. I feel lucky to have found him!
Metal Roofing Around Meridian
We do metal roofing across Meridian, Idaho, and the nearby Treasure Valley towns our service area lists, for homes and businesses.
Kuna, Garden City, Star, Nampa, Boise, Eagle, Middleton and Caldwell
A job outside that footprint is a question for the call.
Service Area Around MeridianMore Metal Roofing Questions
The questions below sit right next to metal roofing, each with a short answer here and the page that covers it in full where one exists.
Metal Roof Lifespan Next to Shingles
A metal roof outlasts asphalt by decades, which favors it if you plan to stay in the home for the long run.
How Long a Roof LastsFire Rating of Metal Roofs
Metal roofing carries a Class A fire rating, which matters for homes near wildland areas.
Metal roof questions
Questions We Hear Before a Metal Roof
Straight answers on price and trade-offs. For your own roof, the number comes from the call.
Call for a Free EstimateWhat is the biggest problem with metal roofs?
The cost at the start: metal roofing costs more up front than asphalt, and that is the trade-off most owners weigh. It outlasts asphalt by decades, which favors it for owners staying in the home long-term.
How much does a 2000 sq ft metal roof cost?
Metal roofing in Meridian typically runs $6,700 to $41,800 a roof, and a basic 1,500-square-foot standing seam roof typically runs $10,000 to $15,700. A bigger roof sits higher in that range, because roofs are priced by the square, 100 square feet of roof surface, along with the panel type, gauge and trim. Our guide to what a roof costs walks through what moves the price, and we measure yours for free.
Is it cheaper to put a metal roof or shingles?
Shingles: asphalt shingles are the cheapest option, while metal, tile and solar shingles cost more but last longer. Our guide to what a roof costs sets out what moves the price of each material.
Thinking about steel?
Ready to price a metal roof for your home or shop?
Call and we will walk the roof, measure it and put a standing seam or metal panel quote in writing. The estimate is free and carries no obligation.
Calls outside working hours go to voicemail, and we return them the next working morning.
We show up when we say we will, and we clean up when the work is done.